我公司生產的戶外綜合柜是為滿足移動通信分布式基站的無機房建設要求而提出，滿足室外通信環境以及設備安裝所指定的技術規范標準。對于各類采用分布式設備（BBU+RRU）的戶外微蜂窩、宏蜂窩等都可參照執行，并根據實際情況配置通信設備安裝區及集成電源系統等。在室外安裝的通信機柜，機柜內配備安裝通信設備、電源、電池、溫控設備及其他配套設備（如ODF等）的格艙，能為內部設備正常運行提供可靠的機械和環境保護的可拆式拼裝機柜，可安裝于戶外山頂、樓頂?shù)入y以搬運的地方，具備良好的防風、防沙、防雨、防曬及防盜等功能，隔熱阻燃型機柜殼體是由低導熱夾層阻燃材料組成，滿足現場散件拼裝，防護等級IP55。機柜設備艙內采用空調、熱交換器等進行換熱方式。

基本要求

溫度、相對濕度

工作溫度范圍：-40℃~+50℃

貯存溫度范圍：-25℃~+55℃

運輸溫度范圍：-45℃~+70℃

相對濕度要求：5%~100%

大氣壓力

62kpa~101kpa（近似于海拔0m~5000m）

太陽輻射強度

總輻射強度1120×（1±10%）W/m2

外觀與表面處理

機柜表面涂層顏色使用灰白色或淺灰色，涂層符合GB/T3181-1995中的要求。

結構特點

1、 室外機柜內由可安裝電源設備、通信設備、配線設備（ODF）、溫控設備（可選）、蓄電池及其他備附件的功能區組成。根據實際應用情況，機柜內可分設為通信設備安裝區、電池艙等若干個艙。

2、 室外機柜材料采用厚度不小于50mm的絕熱阻燃板材料，絕熱阻燃板內外采用厚度不小于0.5mm的彩鋼板。芯材導熱系數小于0.041W/m.K,板材導熱系數不大于0.472W/（㎡.K）。

監控告警

室外一體化機柜具備環境量告警的采集功能。外部環境的告警信息采用于節點方式通過基站傳送到網管OMC。告警狀態開關量采用繼電器實現，防止采集器帶電或不共地造成主設備損壞。溫度、煙感安裝在綜合柜頂部，水浸傳感器安裝在底部。當綜合柜發生門開動作時時，發出告警信號，并能將告警信號以開關量的方式傳給動環監控采集器。當機柜內溫度超出規定范圍時，發出高溫告警，并能將告警信號以開關量的方式傳給動環監控采集器。

組裝方式

戶外機柜同時支持整裝式（整裝發貨現場吊裝）和拼接式（散件發貨現場拼接）兩種組裝方式。如單機柜不能滿足建設要求需要增加機柜擴容時，可滿足與擴容機柜之間的規范連接擴容要求。按照肩并肩模式進行機柜擴容，同時擴容機柜與原有機柜滿足設備正常運行的交、直流供電設備安裝的空間要求。

Changzhou Zhongxing Huada Technology Co.,Ltd.

Specification for Outdoor Integrated Cabinet

Nov, 2012

PREFACE

Outdoor integrated cabinet manufactured by our company is brought forward in order to meet the construction requirements for distributed mobile communication base station without machine room. It satisfies the technical standards for outdoor communication environment and equipment installation. All kinds of distributed equipment (BBU+RRU) of outdoor Micro-cell and Macro-cell can refer to our specifications, and the customer can also configure the cabinet with communication equipment installation area and integrated power system according to the actual situation. Cabins inside the cabinet enables the installation of communication equipment, power supply, battery, air conditioning equipment or other equipment (such as ODF). This detachable assembled cabinet provides reliable mechanical and environmental protection for interior equipment and can be installed on the mountain top, roof or other places that are inconvenient for transportation. The cabinet features anti-wind, anti-sand, anti-rain, anti-sun, anti-theft function ant etc. Its thermal insulated and flame retardant shell is composed of a low thermal conductive laminated fire retardant material. The cabinet meets the on-site assembly requirement, and its protection class is IP55. The equipment cabin transfers heat by air conditioner or heat exchanger.

1. Basic Requirement

Temperature and relative humidity

Operating temperature: -40℃~ +50℃ (-40℉~ +122℉)

Storage temperature: -25℃~ +55℃ (-13℉~ +131℉)

Transportation temperature: -45℃~ +70℃ (-49℉~ +158℉)

Relative humidity: 5% ~ 100%

Atmosphere pressure: 62kpa～101kpa (elevation of 0m~5000m)

Intensity of solar radiation: total radiation intensity of 1120×(1 ± 10%) W/m²

2. Appearance and Surface Treatment

The cabinet surface coating color is grey or light grey, and the coating meets the requirement of GB/T in 3181-1995.

3. Structure

3.1 Outdoor cabinet can be composed of power equipment, communication equipment, wiring equipment (ODF), temperature control equipment (optional), battery and other accessories functional area. Based on the actual application, the cabinet can be divided into communication equipment installation area, battery cabin and other cabins.

3.2 Outdoor cabinet uses thermal insulated and flame retardant material with thickness not less than 50mm, and its inner and outer surfaces are covered with color steel plates whose thickness is not less than 0.5mm. The coefficient of thermal conductivity of core material is less than 0.041W/m·K, and that of plate is less than 0.472W/ (m²·K).

4 Monitoring Alarms

Outdoor integrated cabinet has alarm function for environment. The alarm information of external environment is transmitted through the base station node to the network management OMC by dry connector. Digital alarm status is achieved by using relays in case of the charged collector or no-common ground. Temperature and smoke sensors are arranged at the top part of the integrated cabinet, and water sensor is mounted at the bottom. When the cabinet door opens, it send alarm signal to the dynamic environment monitoring collector using switch quantity. When the temperature of the cabinet exceeds the limit, it sends a high temperature alarm and inform the dynamic environment monitoring collector using switch quantity.

5 Assembly Method

The cabinet can be delivered as a whole (assembled in the factory) or in parts (assembled on site). If single cabinet is insufficient for construction requirements, additional cabinets can be added according to expansion standards. The expansion is accomplished using side-by-side mode. The expanded and original cabinets meet the spatial requirements for the installation of DC or AC power supply devices that are necessary for normal operation of the equipment.

6 Specifications and Technical Parameters

6.1 One unit with two cabins（upper 19-inch rack cabin and lower battery cabin）

6.2 Main equipment cabinet

6.3 Equipment cabinet

6.4 Battery cabinet

Changzhou Zhongxing Huada Technology Co.,Ltd.